PRIMET Co., Ltd.
Model specifications for the order request.
Vacuum Generator
Primet Vacuum generator PVG series can be used for purge process to remove residual gas or CDA in the piping of cylinder cabinet. And there is advantage to be attenuated gas from the vent side by driver gas (Nitrogen or CDA).
Mechanism
Continuos Nitrogen or CDA supply from Inlet of PVG series make vacuum condition at Vacuum, then gas from Vacuum can be discharged to Vent. Scrubber unit should be required depending on the type of gas
Specification
| Inlet | Vent | Vacuum | Attainable Vacuum Press. | N2 Supply Pressure | Suction | Max. Working Pressure | Available Operating Temperature |
|---|---|---|---|---|---|---|---|
| 1/4″ | 3/8″ | 1/4″ | -93.3KPa (60Torr) |
0.49MPa(G) | 26L/min above |
1MPa(G) | 0～150℃ |
Material
| Part name | Material |
|---|---|
| Body | SUS316L |
| Nozzle | SUS316L |
Forms and Dimensions
Unit(mm)
※Specification are subjected to change without prior notice.